Sunix USB 3.1 10G & DisplayPort Alt-Mode PCI Express Host Card with Dual USB Type-C Receptacles

Sunix USB 3.1 10G & DisplayPort Alt-

Featurs:
PCI Express Base Specification Revision 3.0 single-lane (x1).
Expands dual external USB3.1 Super-Speed plus Type-C port (DFP) on the system.
Compliant with Universal Serial Bus 3.1 specification Gen2.
Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
Supports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices
Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.


Specifications
Hardware
BUS PCI Express Spec 3.0, Single-Lane (x1)
Controller PCI Express USB 3.1 Host controller, Asmedia ASM1142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO Assigned by System
USB Communication
Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 2-port
PCB Connector USB 3.1 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge
Video / Audio
Input Interface Standard DisplayPort Female, DisplayPort Ver1.2/1.1
Output Interface USB Type-C port
Audio Yes (audio pass-through)
Power
Source PCI Express Bus Power
Output Capacity USB Type-C Port:
Power Delivery +5VDC / 1.5A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-C Port:
+5VDC / 1.5A / each port / Power Switch
Power Consumption 3.0W @ 3.3V (board only without power output to USB device)
Driver Support
Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Environment
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)
Regulatory Approvals
EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE
Physical Characteristics
PCB Dimension 85.30x 55.75 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1